As a major manufacturer of industrial pumps to JIS and API610 standards, Ebara Corporation has embarked on a globalisation of its range of pumps for the world market. This includes the introduction of a range of industrial pumps to European EN733 standards and a new range of vertical multistage pumps.
Ebara Corporation (Japan) has recently released its new global range of EN733 standard end suction centrifugal pumps. Utilising the most advanced hydraulic computer design software available, Ebara engineers in Japan have been able to improve and increase the pump efficiencies of the new GS range above most other available pumps of similar design and standard on the global market.
The new Ebara GS range of EN733 standard pumps are manufactured in component form at Ebara Corporation Japan owned and managed factories in the Asia Pacific region with final assembly of market range models undertaken by skilled tradesmen at Ebara Pumps Australia’s Melbourne facility.
The new GS series are 16 bar rated pumps, with a close coupled version (GSD) offered as well. Both the GS bareshaft pump and GSD are now available in Australia.
About Ebara Corporation
Ebara Corporation was founded in Japan in 1912 as a manufacturer of pumps. Today, as a group, it consists of more than 70 companies in six continents with a workforce of more 11,000 people and with company owned and Japanese managed factories in eight countries covering four continents.
The huge scale of production and distribution is matched by a constant commitment to research, development
and design of new products and the modern technologies for manufacturing them. Ebara products have gained a worldwide reputation for their technology and quality.
Two of the more popular models that are stocked in Australia are both solids handling pumps. For more details contact us at Ebara Pumps Australia or visit our website.
Model DWO
- Stamped stainless steel pumps with open impeller
- Maximum 19mm passage size
- 50mm discharge
- 1.1 to 1.5kW – 1 phase
- 1.1 to 3.0kW – 3 phase
Model DVS
- Cast iron submersible pumps with semi vortex impeller
- 32 to 56mm passage size (depending on model)
- 50 and 80mm discharge
- 0.4 to 0.7kW – 1 phase
- 0.75 to 3.7kW – 3 phase
- Manual or automatic
Contact your local Ebara dealer or Ebara Pumps Australia for more information.
This partner content is brought to you by Ebara Pumps Australia For more information, visit www.ebara.com.au.
Find Motors, Drives And Engines Related Companies In The Pump Industry Capability Guide
-
ARBS postponed
ARBS Exhibitions held a board meeting on 11 March where it was agreed and decided that the ARBS 2020...
-
Two methods for controlling HVAC flow rates
A heating, ventilation and air conditioning (HVAC) piping system is designed to convey a heat transfer fluid to multiple...
-
Franklin Electric: the story so far
Commencing back in 1962 in Dandenong, Victoria, close by to its present site, Franklin Electric began importing and distributing...
-
The Australian office building market
The total occupied space for office buildings in Australia is estimated at approximately 21.0 million square metres (sqm). While...
-
Pump school: NPSH and elevation
Making sure your pumps are performing their best in their given environment can be vital. However, sometimes less obvious...
-
Self primer ideal for seawater at daydream
A seawater pump was needed at Daydream Island in Queensland to pump filtered seawater to the Living Reef on...
-
Pumping up Dubbo’s assets
Dubbo Regional Council in New South Wales’ Orana Region has been undertaking a range of upgrades, and water and...
-
Advantages of using an air operated double-diaphragm (AODD) pump
When it comes to pump selection, there are so many different pumps on the market and finding the correct...
