casing wear ring
Share

The installation of Vesconite Hilube polymer wear rings can result in electricity savings that more than pay for the wear ring.

This was the result of a study by a large pump original equipment manufacturer (OEM) that compared energy usage on a typical submersible pump when a Vesconite Hilube wear ring was in place and when a stainless steel wear ring had been installed.

Vesconite Hilube is a low-friction wear-resistant polymer. Wear rings made from this material are designed to seal the pressure leakage of the liquid between the inlet and the impeller and the pump casing, and should result in a higher pumping efficiency due to lower by-pass.

Phillip de Villiers

Phillip de Villiers is pleased that Vesconite Hilube’s ability to improve pumping efficiency and decrease electricity usage has been independently proved.

Vesconite Bearing technical pump consultant Phillip de Villiers was pleased when the pump OEM’s results independently proved Vesconite Hilube’s ability to improve pumping efficiency and decrease electricity usage. 

The study showed a 0.11kW/h energy reduction when operation of a pump with a large diameter stainless steel wear ring was compared with operation of the same type of pump with a dimensionally-identical Vesconite Hilube wear ring.

Assuming the Vesconite Hilube wear ring’s use on an industrial pump – operating 24 hours a day, 365 days a year – the electricity savings from installing a Vesconite Hilube wear ring add up, particularly when the pump is operated in a jurisdiction where electricity charges are high.

In the specific pump that was studied by the OEM, the wear ring would have a three-month payback even where a low electricity cost was assumed, notes Mr de Villiers.

He adds that electricity savings for a five-to-ten stage submersible pump can be significant if the electricity savings of each stage are added together.

With concerns about global CO2 emissions from electricity generation – which reached 12Gt in 2010 – as well as an awareness that pumps account for ten per cent of global electrical energy consumption, technological interventions are valued by pump manufacturers and pump users.

They are also of interest to state and national governments that are interested in reducing carbon emissions to keep global warming under 1.5°C.

This partner content was brought to you by VescoPlastics. For more information, visit https://www.vesco.com.au/.

0 Comments

Leave a reply

Your email address will not be published. Required fields are marked *

*

©2021 Pump Industry. All rights reserved

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

or    

Forgot your details?

Create Account