Share

Significant savings and efficiencies can be gained from a holistic insight into the health of standalone assets at a factory or plant, according to IoT expert Freddie Coertze.

“Often, non-processing infrastructure such as air compressors or refrigeration units are delivered as standalone assets and are not part of the production process and SCADA system, meaning there is no visibility on these assets,” said Mr Coertze, the National IoT Business Manager for ifm Australia.

“Yet these units can use a lot of energy. So for the average plant or factory, it can be difficult to collect from these in addition to the equipment used in their processing.”

This is where the moneo IoT platform can be deployed. “This platform can sit between the assets as a middleware, collecting data and informing as to the equipment’s performance,” he said.

“With its in-built DataScience toolbox, it will advise as to the best conditions for efficiency. For example, rather than coming in everyday and turning an asset on at 24 degrees, it will advise whether that temperature is required and is the most efficient use of energy.” Mr Coertze cites an example of an air compressor unit that had a blocked filter.

“As the moneo DataScience toolbox examines the whole system based on real-time data and historic data, as well as inputs that engineers have fed into the software, it provides a good look at the entire system, not just the compressed air, but moisture, pressure and other performance factors,” he said.

“In one case, moneo was able to detect an anomaly with the suction of an air compressor out at a factory. They discovered it was due to a blocked filter and were easily able to action that.” If not for moneo, Mr Coertze said the factory wouldn’t have checked the filter.

“Instead, they would have not noticed any evidence of an issue until the whole unit started to vibrate and already at that stage it is beginning to fail. “The real benefit of this moneo software platform is in its ability to gain a holistic view and predict issues before they become costly. It’s not just about preventing a catastrophic failure, it’s about optimising the asset’s health and lifespan.”

According to Mr Coertze, water tracking is another way in which moneo can be utilised – not just to track water usage at a plant, but to ensure water that is released back into the environment or sewerage system is of an acceptable quality.

“Again, moneo can collect data from several inputs and can be integrated with existing IT infrastructure or run separately. In the case of water tracking, this has become an important issue for many plants as they can get fined by their local council if the water quality is not up to standard,” he said.

“With moneo and our sensor hardware, we can provide a turnkey solution to ensure the water treatment a facility has in place is effective so that any fats, oils or other harmful substances are removed from the water before it is released down the drain.”

This sponsored editorial is brought to you by moneo Solutions. For more information, visit www.moneosolutions.com.au

Find Valves Related Companies In The Pump Industry Capability Guide



Related articles
0 Comments

©2024 Pump Industry. All rights reserved

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

or    

Forgot your details?

Create Account